RatOs setup board BIGTREETECH WIKI EBB SB2209 USB V1.0 not work #199
Description
What happened
In setup,
ratos not recognize my board for install firmware (yes, is in DFU mode).
What did you expect to happen
Install board firmware
How to reproduce
Enter setup, connect board in DFU mode
Additional information
I have try to install klipper manually
Installed katapult to have serial
cd /home/pi/klipper
make menuconfig (setting for RP2040)
make
make flash FLASH_DEVICE=2e8a:0003
Now in setup "Flash unidentified board" is enabled (klipper expose /dev/serial/by-id/usb-Klipper_rp2040_50445061186AE81C-if00)
Now, i try to install firmware with this menu, but i have an error
Distro: RatOS v2.1.0-RC 2 (bullseye)
RatOS Core: Configurator & Configuration
v2.1.0-RC3-26-g33980992
Flashing SB2209 v1.0 RP2040 at /dev/serial/by-id/usb-Klipper_rp2040_50445061186AE81C-if00...
Could not compile firmware for SB2209 v1.0 RP2040: Could not find compiled firmware at /home/pi/klipper/out/klipper.uf2
/home/pi/klipper /home/pi/ratos-configurator/app
Creating symbolic link out/board
Loaded configuration '/home/pi/klipper/.config'
Configuration saved to '/home/pi/klipper/.config'
Creating symbolic link out/board
Creating symbolic link out/board
Building out/autoconf.h
Compiling out/src/sched.o
Compiling out/src/command.o
Compiling out/src/basecmd.o
Compiling out/src/debugcmds.o
Compiling out/src/initial_pins.o
Compiling out/src/gpiocmds.o
Compiling out/src/stepper.o
Compiling out/src/endstop.o
Compiling out/src/trsync.o
Compiling out/src/adccmds.o
Compiling out/src/spicmds.o
Compiling out/src/i2ccmds.o
Compiling out/src/pwmcmds.o
Compiling out/src/buttons.o
Compiling out/src/tmcuart.o
Compiling out/src/neopixel.o
Compiling out/src/pulse_counter.o
Compiling out/src/lcd_st7920.o
Compiling out/src/lcd_hd44780.o
Compiling out/src/spi_software.o
Compiling out/src/i2c_software.o
Compiling out/src/thermocouple.o
Compiling out/src/sensor_adxl345.o
Compiling out/src/sensor_angle.o
Compiling out/src/sensor_mpu9250.o
Compiling out/src/sensor_lis2dw.o
Compiling out/src/sensor_ldc1612.o
Compiling out/src/sensor_hx71x.o
Compiling out/src/sensor_ads1220.o
Compiling out/src/sensor_bulk.o
Compiling out/src/avr/main.o
Compiling out/src/avr/timer.o
Compiling out/src/avr/gpio.o
Compiling out/src/avr/adc.o
Compiling out/src/avr/spi.o
Compiling out/src/avr/i2c.o
Compiling out/src/avr/hard_pwm.o
Compiling out/src/avr/watchdog.o
Compiling out/src/avr/serial.o
Compiling out/src/generic/serial_irq.o
Building out/compile_time_request.o
Version: v0.12.0-396-gb7233d119
Linking out/klipper.elf
Creating hex file out/klipper.elf.hex
/home/pi/ratos-configurator/app