Further fixed things for compile examples

Author: rsoric

README.md

@@ -14,7 +14,7 @@ Inkplate 6 was crowdfunded on [Crowd Supply](https://www.crowdsupply.com/e-radio
 In order to get a head start with Inkplate (any), follow these steps:
 
 1. [Install Inkplate board definition](https://github.com/SolderedElectronics/Dasduino-Board-Definitions-for-Arduino-IDE/blob/master/README.md) - add Inkplate 6/10/6PLUS/6COLOR/2 as a board into your Arduino IDE. Follow the instructions on the [link](https://soldered.com/learn/add-inkplate-6-board-definition-to-arduino-ide/).
-2. Install CH340 drivers (if you don't have them yet) - instructions [here](https://soldered.com/learn/ch340-driver-installation-croduino-basic3-nova2/)
+2. If you aren't using macOS install CH340 drivers (in case you don't have them yet) - instructions [here](https://soldered.com/learn/ch340-driver-installation-croduino-basic3-nova2/)
 3. Install Inkplate Arduino library - Install the library from the Arduino Library Manager (just type "Inkplate" and click "Install") or install it with this repo. If you don't know how, check our [tutorial](https://soldered.com/learn/arduino-library/#Kako%20instaliraty%20library?).
 4. You are ready to get started! Select Tools -> Board -> Inkplate Boards and then pick correct one, as well as correct COM port and upload!
 

examples/Inkplate10/Advanced/DeepSleep/Inkplate10_Wake_Up_On_Touchpads/Inkplate10_Wake_Up_On_Touchpads.ino

@@ -9,6 +9,9 @@
 
    NOTE: This is an example for the old Inkplates that have touchpads.
 
+   IMPORTANT: Some old Inkplate boards require an additional 10k PULL-UP resistor for this to work
+   For more info, see https://github.com/SolderedElectronics/Inkplate-Arduino-library/issues/179#issuecomment-1562360919
+
    Want to learn more about Inkplate? Visit www.inkplate.io
    Looking to get support? Write on our forums: https://forum.soldered.com/
    15 March 2023 by Soldered

examples/Inkplate6/Advanced/DeepSleep/Inkplate6_Wake_Up_On_Touchpads/Inkplate6_Wake_Up_On_Touchpads.ino

@@ -6,6 +6,9 @@
    https://soldered.com/learn/add-inkplate-6-board-definition-to-arduino-ide/
 
    Here is shown how to use I/O Expander and ESP interrupts to wake up the MCU from deepsleep when touchpad is pressed.
+
+   IMPORTANT: Some old Inkplate boards require an additional 10k PULL-UP resistor for this to work
+   For more info, see https://github.com/SolderedElectronics/Inkplate-Arduino-library/issues/179#issuecomment-1562360919
    
    Want to learn more about Inkplate? Visit www.inkplate.io   
    Looking to get support? Write on our forums: https://forum.soldered.com/

examples/Inkplate6COLOR/Advanced/Communications/Inkplate6COLOR_Bluetooth_Peripheral_Mode/Peripheral.h

@@ -218,17 +218,7 @@ void run(char commandBuffer[], size_t n, Inkplate *display, BluetoothSerial *Ser
                     SerialBT->flush();
                 }
                 break;
-
-            case 'R':
-                sscanf(s + 3, "%c", &b);
-                if (b == '?')
-                {
-                    SerialBT->print("#R(");
-                    SerialBT->print(display->getPanelDeepSleepState(), DEC);
-                    SerialBT->println(")*");
-                    SerialBT->flush();
-                }
-                break;
+                
             case 'S':
                 sscanf(s + 3, "%d,%d,\"%149[^\"]\"", &x, &y, strTemp);
                 n = strlen(strTemp);

examples/Inkplate6COLOR/Advanced/DeepSleep/Inkplate6COLOR_Wake_Up_On_Touchpads/Inkplate6COLOR_Wake_Up_On_Touchpads.ino

@@ -6,6 +6,9 @@
    https://soldered.com/learn/add-inkplate-6-board-definition-to-arduino-ide/
 
    Here is shown how to use I/O Expander and ESP interrupts to wake up the MCU from deepsleep when touchpad is pressed.
+
+   IMPORTANT: Some old Inkplate boards require an additional 10k PULL-UP resistor for this to work
+   For more info, see https://github.com/SolderedElectronics/Inkplate-Arduino-library/issues/179#issuecomment-1562360919
    
    Want to learn more about Inkplate? Visit www.inkplate.io   
    Looking to get support? Write on our forums: https://forum.soldered.com/

examples/Inkplate6COLOR/Diagnostics/Inkplate6COLOR_Peripheral_Mode/Inkplate6COLOR_Peripheral_Mode.ino

@@ -239,16 +239,6 @@ void loop()
                 }
                 break;
 
-            case 'R':
-                sscanf(s + 3, "%c", &b);
-                if (b == '?')
-                {
-                    Serial.print("#R(");
-                    Serial.print(display.getPanelDeepSleepState(), DEC);
-                    Serial.println(")*");
-                    Serial.flush();
-                }
-                break;
             case 'S':
                 sscanf(s + 3, "%d,%d,\"%149[^\"]\"", &x, &y, strTemp);
                 n = strlen(strTemp);

examples/Inkplate6PLUS/Advanced/DeepSleep/Inkplate6PLUS_Wake_Up_On_Touchscreen/Inkplate6PLUS_Wake_Up_On_Touchscreen.ino

@@ -8,6 +8,9 @@
    Here is shown how to use I/O expander and ESP interrupts to wake up the MCU from deepsleep when touchscreen or wake up button
    is pressed.
 
+   IMPORTANT: Some old Inkplate boards require an additional 10k PULL-UP resistor for this to work
+   For more info, see https://github.com/SolderedElectronics/Inkplate-Arduino-library/issues/179#issuecomment-1562360919
+
    Want to learn more about Inkplate? Visit www.inkplate.io
    Looking to get support? Write on our forums: https://forum.soldered.com/
    8 December 2022 by Soldered