programmers.txt

# Programmers for burning UF2 bootloaders
# See platform.txt for tool definitions

# J-Link (via STM32CubeProgrammer)
jlink.name=J-Link
jlink.protocol=jlink
jlink.bootloader.tool=jlink_bootloader
jlink.bootloader.tool.default=jlink_bootloader

# J-Link with full chip erase
jlink_erase.name=J-Link (Erase All)
jlink_erase.protocol=jlink
jlink_erase.bootloader.tool=jlink_bootloader_erase
jlink_erase.bootloader.tool.default=jlink_bootloader_erase

# ST-Link (via STM32CubeProgrammer)
stlink.name=ST-Link
stlink.protocol=stlink
stlink.bootloader.tool=stlink_bootloader
stlink.bootloader.tool.default=stlink_bootloader

# ST-Link with full chip erase
stlink_erase.name=ST-Link (Erase All)
stlink_erase.protocol=stlink
stlink_erase.bootloader.tool=stlink_bootloader_erase
stlink_erase.bootloader.tool.default=stlink_bootloader_erase

# DFU (USB) - requires entering DFU mode first (hold BOOT + reset)
dfu.name=DFU (USB) - Hold BOOT + Reset first
dfu.protocol=dfu
dfu.bootloader.tool=dfu_bootloader
dfu.bootloader.tool.default=dfu_bootloader