Menu widths

[Barcenilla00]

Is it possible to set different sizes for each menu sublevel? In my case, the menu header determines the width, and the values ​​I enter in the subheaders don't work. Is this correct?

[panda1007]

If you want to set the different width for each menu sublevel, why not adjust the menu width in the Astroid Menu Option of each parent menu https://snipboard.io/Ktc1bF.jpg

[Barcenilla00]

It doesn't work for me, that's the problem...
I've been trying, but the only parameter that works is the one for the first-level menu field. The rest of the levels don't work, even if I modify them.

[panda1007]

I will check it again. If it's true, it will be addressed in the next version.

[matrix630307]

i have a installation with 3.3.4-rc2 and i have tested with a life site with 3.3.3.
when i change the value here https://snipboard.io/Ktc1bF.jpg
the submenu will react on the two sites.
it work's for me.

[panda1007]

@matrix630307 It works for the first submenu level, but seem not work for the second or third levels.
The width of the second or third level only reflects according to the first one.

[matrix630307]

@panda1007 yes - that's right. it only works for the first level and the other sublevels not. sorry, i have not read your post excactly! why you made a discussion and not a bug?

[panda1007]

I just realized it is a bug thanks to the discussion made by @Barcenilla00 here :)

[Barcenilla00]

@panda1007 yes - that's right. it only works for the first level and the other sublevels not. sorry, i have not read your post excactly! why you made a discussion and not a bug?

Because I wasn't sure if I was doing it correctly.

[Barcenilla00]

I just realized it is a bug thanks to the discussion made by @Barcenilla00 here :)

Thanks!

[sonvnn]

@Barcenilla00 I fixed this issue in 402bb34
Please help me download v3-branch and retest it.

Best Regards,
Sonny

[Barcenilla00]

I've installed and it works for me actually.
Thanks!

[matrix630307]

Hi Sonny On my testsite i twill not work. See on https://pontonier.ch/cms1/ Menupoint: Publikationen / Links Submenu: Medien (set with 250px) under this Submenu i have another Menu "Medien II", set width 600px – will show with 250px instead 600px. AND: the Menupoint "Medien II" is not active. When i will hover with the mouse, the menupoint is lost. Marcel

[matrix630307]

on menu "Publikationen / Links" is have made this:
subemnu "medien": submenu "medien II" with 700px
submenu "pontonier - Magazin": subemnu "testmenu" with 700 (no "px")
i have no reaction from the with...

[matrix630307]

test on another site: https://kaempf-landmaschinen.ch/cms1
menu: "unser angebot"

1. submenu: "Werkstatt"
   submenu in this "Werkstatt" with "test1".
   testinge with 700 and 700px. same result - no reaction on width

[sonvnn]

Can you send me your admin acc? I will help you check it.

[sonvnn]

Please send me your acc via [email protected]

[matrix630307]

i have sent the login...

[matrix630307]

hi sonny
now, i mean i have understand the logic of the width?! on the site https://pontonier.ch/cms1 i have the menupoint "Publikationen / Links". Here in the Menu-Item config i have give 250px to width. this will give 250px to submenu "Medien".
in the subemnu "Medien" i have give the widt with 650px. this give the width at the sub-submenu "Medien II" in the submenu "Medien".
Conclusion for me is: the width in a menupoint will give the width to the next submenu and not for the menupoint i have open and give the width??? that's right?

[panda1007]

Yes, right. That's the way the width works

[matrix630307]

ok - then it works :)....

[matrix630307]

remark from my site to this theme:
for me is this not logical. The value entered at a menu/submenu level affects the next lower element. If I enter the value in a menu/submenu, I actually expect it to affect the element/menu where I enter it.

[Barcenilla00]

But what if you have multiple lines at the submenu level with different widths... how would the theme understand that?