Stickerz

Stickerz is Nick Greenfield's sticker go/return mod for the reMarkable Paper Pro. It adds a peeled-sticker button on every open document and a back-to-document button on the Stickers notebook, so you can pick a sticker with the native lasso, copy it, return, and paste. This repository is version 1.0. It has been tested on Nick's Paper Pro, firmware 3.28.0.172.

There is no picker panel and no one-tap stamp. Copy and paste stay native reMarkable behaviour.

How it works

1. In any open document, tap the peeled-sticker icon at the top right (just left of the close X). Stickerz remembers that document and page, then opens the Stickers notebook.
2. On a sticker page, use the normal lasso / selection (capture) tool, select a sticker, and Copy.
3. Tap the back-to-document icon at the top right of the Stickers notebook (same spot as the sticker icon). You return to where you were.
4. Paste the sticker into your document.

The sticker icon is hidden inside the Stickers notebook; the back icon takes its place there.

Button	Design
Open Stickers	Peeled sticker: a square with the bottom-right corner folded, fold shaded light grey
Back	Left arrow pointing at a lined document page

Both icons are drawn in QML with plain Canvas (black on white for e-ink), 88×88, with topMargin: 16 and rightMargin: 120.

Requirements

• A reMarkable Paper Pro on firmware 3.28 (tested on 3.28.0.172), with developer mode on.
• XOVI and qt-resource-rebuilder, already installed and working (for example via reManager).
• A Windows 10 or Windows 11 PC. Over USB, the installer's default address 10.11.99.1 works. Over Wi-Fi, use the tablet's IP.

Installation (Windows installer)

1. Download Stickerz-1.0-Setup.zip from the Releases page and extract it. The program is Stickerz-1.0-Setup.exe.
2. Windows SmartScreen may warn that it does not recognise the app. Choose More info, then Run anyway.
3. Plug the tablet in by USB (or join the same Wi-Fi) and unlock it.
4. The SSH user is root. The password is under Settings > General > About > Copyrights and licences (scroll to the bottom). Developer mode is required. The password is case-sensitive and can change after a software update.
5. Run Stickerz-1.0-Setup.exe. Enter the IP address (default 10.11.99.1), the user root, and the password. The password is masked as you type and is never stored.
6. When the menu appears, choose:
   • 1 — Install or update Stickerz
   • 2 — Uninstall Stickerz
7. After install, in reManager: rebuild the hashtab, then restart XOVI / xochitl. The installer does not restart the UI for you.

Upgrading from the older rm-stickers v3 / v3.1 packages is supported: install.sh moves the old rm-stickers.qmd aside (with a backup) so only stickerz.qmd loads. Your Stickers notebook is kept.

Manual install

1. Download Stickerz-1.0.zip from Releases and extract it so you have a Stickerz-1.0 folder containing install.sh.
2. Copy it to the tablet:

scp -r Stickerz-1.0 root@10.11.99.1:/home/root/stickerz

3. SSH in and run:

sh /home/root/stickerz/install.sh

4. In reManager: rebuild the hashtab, then restart XOVI / xochitl.

What install.sh does

• Prints the firmware version.
• Backs up exthome/qt-resource-rebuilder to /home/root/stickerz-backup-<time>/ before changing anything.
• Never overwrites a file it did not create (or that does not look like Stickerz / rm-stickers).
• Moves rm-stickers.qmd (from v3/v3.1) into the backup so both mods do not load.
• Moves only a leftover v1 stickerPicker.qmd (which needs a native .so) into that backup.
• Leaves extensions.d alone.
• Installs /home/root/xovi/exthome/qt-resource-rebuilder/stickerz.qmd.
• Records created paths in /home/root/xovi/stickerz.manifest.
• Adds the Stickers notebook only if it is not already there.

Uninstall

sh /home/root/stickerz/uninstall.sh

Or run the Windows installer and choose 2.

That removes only what is listed in the Stickerz (and leftover rm-stickers) manifest. It keeps the Stickers notebook unless you pass --remove-library. Afterwards, rebuild the hashtab and restart in reManager.

If it goes wrong

XOVI is tethered. If a hash does not resolve, xochitl can crash-loop and the tablet reboots to stock (no mods).

1. SSH in: ssh root@10.11.99.1
2. Run sh /home/root/stickerz/uninstall.sh
   or delete /home/root/xovi/exthome/qt-resource-rebuilder/stickerz.qmd
   (and rm-stickers.qmd if it is still present)
3. Rebuild the hashtab and restart XOVI in reManager.

Repository layout

Path	Contents
src/stickerz.qmd	The QML mod loaded by qt-resource-rebuilder
library/	The Stickers notebook (reMarkable document)
install.sh / uninstall.sh	On-tablet install and uninstall
installer/	Go source for the Windows installer (payload embeds the files above)
assets/	Icons used on this page and by the installer

Build outputs (.exe, .zip, .syso) are not committed. Download them from Releases.

Licence

GPL-3.0-or-later. Author: Nick Greenfield. See LICENSE.

Approaches derived from / credits:

• alefaraci / linkFromSelection (GPL-3.0-only)
• FouzR patterns used in earlier versions (GPL-3.0)
• ingatellent hideDocumentClose / stickers research (GPL-2.0-or-later) — credit kept; their SceneAssistant native path is not used
• rmitchellscott touchLock / share-button-to-menu research (GPL-3.0-only) — cited for toolbar evidence only

XOVI and qt-resource-rebuilder: asivery.

Evidence / provenance

• AFFECT 8850026134298937527 / open-doc helper and AFFECT 11806562588218124596 / DocumentView overlay: same targets as alefaraci linkFromSelection.qmd (3.28) and rm-stickers v3.1.
• open(doc, pageIdx) via hashed call 9497240032101537789: linkFromSelection 3.28.
• Page jump via 7713405014271992 + enum path from linkFromSelection 3.28.
• Library lookup 233694067165438 / 8399431778896295215: linkFromSelection 3.28.
• Close-button id 476924601591820571: hideDocumentClose 3.28 (visibility only — not used for INSERT).
• Plain QtQuick types (Item, Rectangle, MouseArea, Text, Timer, Canvas) are unhashed.