Search results

Store the components' mount positions in EEPROM

Status: Open.

#258 In rLoopTeam/eng-software-pod;

· dean9 opened on Dec 14, 2016

·  

CTRL-65 FLIGHT CONTROL / PITCH / YAW

May need some filtering or FFT to detect yaw or pitch oscillations

ready

Status: Open.

#151 In rLoopTeam/eng-software-pod;

· omegabytes opened on Oct 29, 2016

·  

CTRL-65 FLIGHT CONTROL / PITCH / YAW

Check for sensor range limits, etc. report any faults

in progress

Status: Open.

#148 In rLoopTeam/eng-software-pod;

· omegabytes opened on Oct 29, 2016

·  

CTRL-65 FLIGHT CONTROL / PITCH / YAW

Make sure GS can control and interract with each ASI, save settings, read RPM and thermal, etc.

clarification needed

Status: Open.

#135 In rLoopTeam/eng-software-pod;

· omegabytes opened on Oct 28, 2016

·  

CTRL-62 FLIGHT CONTROL / ASI INTERFACE

Provide a distance calculation

clarification needed

Status: Open.

#123 In rLoopTeam/eng-software-pod;

· omegabytes opened on Oct 28, 2016

Interface with pusher interlock

clarification needed

Status: Open.

#116 In rLoopTeam/eng-software-pod;

· omegabytes opened on Oct 28, 2016

·  

CTRL-58 FLIGHT CONTROL / BRAKES

Ensure that any position error is handled correctly

clarification needed

Status: Open.

#114 In rLoopTeam/eng-software-pod;

· omegabytes opened on Oct 28, 2016

·  

CTRL-58 FLIGHT CONTROL / BRAKES

Monitor and log bus performance, error rates, etc from the test system.

clarification needed

Status: Open.

#100 In rLoopTeam/eng-software-pod;

· omegabytes opened on Oct 28, 2016

·  

CTRL-57 SC16IS741 (SPI to UART Driver)

Create a bench test system to simulate the input's from all the lasers

clarification needed

Status: Open.

#99 In rLoopTeam/eng-software-pod;

· omegabytes opened on Oct 28, 2016

·  

CTRL-57 SC16IS741 (SPI to UART Driver)

Provide functions to start charge, stop charge, monitor charge volts and current

clarification needed

feature

Status: Open.

#90 In rLoopTeam/eng-software-pod;

· omegabytes opened on Oct 26, 2016

·  

CTRL-56 LCCM653__RLOOP__POWER_CORE / CHARGER

Ensure the temp data, ROMID, manual search start, individual sensor scan, etc is selectable and manually usable from ground station

clarification needed

Status: Open.

#57 In rLoopTeam/eng-software-pod;

· omegabytes opened on Oct 26, 2016

·  

CTRL-47 DS18B20 (1-Wire temp sensors needed for batt and BCM discharge temp)

Check and verify the results of requesting from a device that does not have a ROMID on the bus

clarification needed

test

Status: Open.

#55 In rLoopTeam/eng-software-pod;

· omegabytes opened on Oct 26, 2016

·  

CTRL-47 DS18B20 (1-Wire temp sensors needed for batt and BCM discharge temp)